solar panel assembly laminator

1- Project planning 2- supply of complete production line 3- Installation 4- Trial production 5- After sales service

Module	HQ-C1	HQ-C2	HF-CH3
Dimension(mm)	12000*2400*1380	13200*2800*1380	15900*2800*1380
Laminating area(mm)	3200*1800	3600*2200	4600*2200
Weight of equipment(T)	15	15.8	16.8
Laminating height (mm)	25	25	25
Power	AC380V Three phase, four wire	AC380V Three phase, four wire	AC380V Three phase, four wire
Compressed air pressure needed(Mpa)	0.6-1.0	0.6-1.0	0.6-1.0
Cooling water flow needed(L/min)	2	2	2
Total power of equipment (KW)	55	65	75

Technical Specification:

1,  Operation controlling mode: manual /full automatic

2,  Heating mode: oil-heating, base work & modulation work double heating function

3,  Temperature control: PID intelligent temperature control

4,  Temperature uniformity in working area : ≤±1.5°C

5,  Temperature control accuracy: ≤±1°C

6,  Temperature control range 30°C-180°C

7,  Pumping speed: 70L/s

8,  Laminating time: 2-4mins(not excluding curing time)

9,  Operating vacuum degree:200-20Pa

Technical parameters:1. Structure forms: Oil heating systems, vacuum systems, mainframe integration design,2. Transmission system: the feeder, host, a feeder convey or infinite cycle of work, speed: 0 ~ 300 mm / s arbitrary adjustment.3. Supply voltage: 380V/3 phase/4 Line, or according customer requirements. the maximum power equipment 48 KW, the normal work of 20 KW.4. Heating rate: 135 °C at room temperature with 50 to 60 minutes.5. Vacuum rate: 200 L / S, the limit vacuum 70 ~ 90 Pa, vacuum Time: 90 seconds.6. The scope of application: Effective pyramid of 3600 mm * 2200mm, conventional 210 Wp (1650*1030) battery components at the same time three pyramid.7. Production Capacity: 210 WP*4pieces/ time*4time/h*8hours*300days= 8.064 MWP / year.

solar panel assembly laminator